VSD05M
NFPA D05 (NG10)
VSD05M
SOLENOID OPERATED
DIRECTIONAL VALVES
2
WWW.CONTINENTALHYDRAULICS.COM - SALES@CONTHYD.COM
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
VSD05M
SOLENOID OPERATED DIRECTIONAL VALVES
DESCRIPTION
These valves conform to NFPA D05 and ISO 4401 mounting
standards. They are available in both 3 way and 4 way styles.
All versions are available in 2 position spring offset, 2 position detent,
2 position spring centered and 3 position spring centered versions.
A wide range of spools are available.
Standard and CSA approved versions are available.
TYPICAL PERFORMANCE SPECIFICATIONS
MAXIMUM
OPERATING
PRESSURE
P - A - B
Ports
Standard 4600 psi 320 bar
CSA 4000 psi 275 bar
T Port
DC
STD 3000 psi 210 bar
AC ALL 2000 psi 140 bar
FLOW RATE
DC 38 gpm 145 lpm
AC 32 gpm 120 lpm
MOUNTING SURFACE
NFPA D05,
ISO 4401-05-04-0-05
MAXIMUM
WEIGHT
AC 8.0 lbs 3.6 kg
DC 10.6 lbs 4.8 kg
RANGE TEMPERATURES
Ambient - 4 to +130°F -20 to +54°C
Fluid
Standard - 4 to +180°F -20 to +82°C
CSA -4 to +150°F -20 to +66°C
FLUID VISCOSITY
Range 60 -1900 SUS 10 - 400 cSt
Recommended 120 SUS 25 cSt
FLUID CONTAMINATION ISO 4406:1999 Class 20/18/15
SALES@CONTHYD.COM - WWW.CONTINENTALHYDRAULICS.COM
3
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
SEAL
A Buna (STD)
G Viton
MECHANICAL
OMIT IF NOT REQUIRED
R
Single Solenoid Operator At
‘B’ Port End.
WD Wash-Down
ELECTRICAL OPTION
OMIT
Plug-in terminal
B
Connection box with
terminal posts and lights
(AC only)
VSD05M - L --
TYPICAL ORDERING CODE:
VSD05M-3A-AB5A-60L-B
VSD05M-3A-A-33L-B
IDENTIFICATION CODE
DESIGN LETTER
Spool Type
See Next Page
SOLENOIDS - See the codes on page 10
FUNCTION
1
Single Solenoid
2 Position
Spring Offset
2
Dual Solenoid
2 Position
Detented (No Spring)
3
Dual Solenoid
3 Position
Spring Centered
5
Single Solenoid
2 Position
Spring Centered
6
Single Solenoid
2 Position
Energize To Center
9
Single Operator
2 Position - 3 Way
Spring Offset
CONNECTION BOX OPTIONS
OMIT IF NOT REQUIRED
See the codes on page 9
APPROVALS
OMIT STD VALVE
CSA
CSA US/CAN
(AC only)
-
solenoid
4
WWW.CONTINENTALHYDRAULICS.COM - SALES@CONTHYD.COM
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
Note 1
Note 1
Note 1
Note 1
Note 1
Note 1
Note 1
Note 1: Spool not available with Code 68L coils.
SALES@CONTHYD.COM - WWW.CONTINENTALHYDRAULICS.COM
5
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
PRESSURE DROPS ∆P-Q SHIFTED VALVE
(OBTAINED WITH VISCOSITY OF 170 SUS - 36 CST AT 70°F - 50°C)
PRESSURE DROPS ∆P-Q CENTRAL POSITION
SPOOL
FLOW CURVE NUMBER
P→A P→B A→T B→T
A, A1 2 2 1 1
B 3 3 1 1
E, F, F1, K, 1A, 2A, 1B, 2B 3 3 2 2
H, L, Q 1 1 2 2
G 1 1 1 1
SPOOL
FLOW CURVE NUMBER
P→A P→B A→T B→T P→T
B, L, H, Q 5
E 6
F 6 6
G 3 3
K 6
PERFORMANCE CURVE
CURVE SPOOL
1 A, B, G, 9X
2 L
3 1A
4 1A-R
5 F
6 1B
7 F1
8 E, K
9 H, Q
DC VOLTAGE
6
WWW.CONTINENTALHYDRAULICS.COM - SALES@CONTHYD.COM
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
NOTES:
1. The values indicated in the graphs are relevant to the standard
valve. The DC Performance Curve used a 42L coil, the AC
Performance Curve used a 60L coil, and the AC Low Force Curve
used a 68L coil.
2. Valve performance was tested in a four way circuit (full loop).
Performances may be reduced from that shown when used in a
three-way circuit (half circuit), i.e. A or B port plugged.
3. The values have been obtained according to ISO 6403 norm with
solenoids at rated temperature and supplied with voltage equal to
90% of the nominal voltage. The value have been obtained with
PERFORMANCE CURVE
CURVE SPOOL
1 A, B, G, 9X
2 L
3 1A
4 F, F1
5 K, E
6 H, Q
CURVE SPOOL
1 1B, 2B, G
2 1B-R
3 1A
4 1A-R
5 B
6 A
7 2A
8 F
AC VOLTAGE
AC VOLTAGE - LOW FORCE
SALES@CONTHYD.COM - WWW.CONTINENTALHYDRAULICS.COM
7
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
OVERALL AND MOUNTING DIMENSIONS - CONNECTION BOX VERSION
Dimensions in mm [IN]
VSD05M-2*, 3*
Mounting
surface with
sealing rings:
5 pcs.
AS568-014 90
Shore A
Connection Box
Manual Override
Integrated in the
Tube.
Manual Override
Integrated in the
Tube.
Coil Removal
Space
Coil Removal
Space
SOL. ‘A’SOL. ‘B’
SOL. ‘B’
VSD05M-1*, 5*, 6*, 9*
8
WWW.CONTINENTALHYDRAULICS.COM - SALES@CONTHYD.COM
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
OVERALL AND MOUNTING DIMENSIONS - DIN STYLE VERSION
Dimensions in mm [IN]
VSD05M-2*, 3*
VSD05M-1*, 5*, 6*, 9*
Mounting
surface
with sealing
rings: 5 pcs.
AS568-014 90
Shore A
Coil with DIN style shape (DIN 43650) Connector
DC Coil Shape:
Round
AC Coil Shape:
Square
Coil Removal
Space
Coil Removal
Space
SOL. ‘A’SOL. ‘B’
Manual
Override
Integrated
in the Tube.
Manual
Override
Integrated
in the Tube.
SALES@CONTHYD.COM - WWW.CONTINENTALHYDRAULICS.COM
9
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
Deutsch DT04 is also available in DC voltages only.
10
WWW.CONTINENTALHYDRAULICS.COM - SALES@CONTHYD.COM
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
The DIN, Deutch coils versions of the wash-down option uses silicone sealant to help seal
between the coil and core tube.
SALES@CONTHYD.COM - WWW.CONTINENTALHYDRAULICS.COM
11
VSD05M - SOLENOID OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS INC.
4895 12th Avenue East
Shakopee, Minnesota 55379
Phone: (952) 895-6400
Fax: (952) 895-6444
Email: sales@conthyd.com
Web: www.continentalhydraulics.com
FORM NO. 1015299. REV. 11/2018. ©2012 CONTINENAL HYDRAULICS. ALL RIGHTS RESERVED. PRODUCT SPECIFICATION AND APPEARANCE ARE SUBJECT TO CHANGE WITHOUT NOTICE.
